YouTube video play

T6000

Retractable roof that opens up to 87% of its total.

Maximum glazed panel width
2200 mm

Maximum free span (projection)
12000 mm

Maximum glazing gaps
28 mm

Thermal performance
Uw 3,0 W/m²K

The T6000 series is the most versatile in our range of motorised retractable roofs. It is specially designed to cover large spaces with excellent air tightness and insulation results.

Amazing flood of natural light.

With this series, it is possible to maximise the entry of light to any room while reducing the necessary structure to a minimum. The exclusive design of the T6000 retractable roof allows up to 11.2 m of projection and supports glass panels up to 2.2 m wide.

The motorised roof panels of the T6000 series slide automatically to open up to 87% of the enclosure.

Custom glass and panels.

  • Insulating glass with 3+3 laminated glass inside, 16 mm space and 4, 5 or 6 mm tempered glass on the outside. Up to 28 mm in total.
  • 16, 20 or 25 mm cellular polycarbonate.
  • 16, 20 or 25 mm sandwich panel.

Aluminium profile finishes.

The T6000 retractable roof profiles can be lacquered in the colours of the RAL Classic range, or given an anodised finish or an imitation-wood effect. Choose the finish for your retractable roof.

NOTE: In the anodized and wood effect finishes, the steel structures and the sheet metal finishes will be lacquered in the chosen RAL.

 
Glass and panels.

Laminated glass

The joining of several glass sheets of any thickness, by means of intermediate films made with translucent plastic materials

Further information ->

Laminated tempered glass

Laminated-tempered glasses combine the qualities of both types of glass.

Further information ->

Insulating glass

Two or more glass sheets separated by a space that prevents any contact between the glass.

Further information ->

Polycarbonate

Polycarbonate plates that are highly resistant to the elements and to possible impacts.

Further information ->

Sandwich panel

Totally opaque and highly resistant aluminium plates or sandwich panels. These plates are composed of three sheets.

Further information ->

Photovoltaic glass

Photovoltaic glass is made up of a series of thin layers of semiconductor materials that generate electricity by absorbing sunlight. The composition of the glasses […]

Further information ->

Laminated glass

Laminated glass

Laminated glass consists of the joining of several glass sheets of any thickness, by means of intermediate films made with translucent plastic materials. These films are mostly made of polyvinyl butyral (PVB), ethylene-vinyl acetate (EVA) and UV-activated resins, or simply a mixture of their ingredients.

These films can be transparent, translucent or coloured (sometimes the colours may have been applied directly to the interlayer, although it is the sheet that is usually coloured) and include practically everything: patterned paper, LEDs, fabrics, etc. They can also receive acoustic and solar control treatment.

Laminated glass properties.

Its most remarkable property is that, in case of fracture, the plastic film prevents glass fragments from shattering. This considerably improves its mechanical performance in case of impact and avoids the danger of glass splinters being released. This is possible thanks to its sheets or thickness (PVB).

The greater the number of sheets, the safer it is against intrusion, dramatically increasing safety for people and objects under the roof. The UNE-EN 356 standard classifies these glass sheets in a scale comprising different levels, depending on their resistance to impact.

Laminated glass is also known as safety glass, although this is just one of the types on the market and not all safety glass (such as tempered glass) is necessarily laminated.

Laminated tempered glass

Laminated tempered glass

Laminated-tempered glasses combine the qualities of both types of glass.

Laminated glass consists of the joining of several glass sheets of any thickness, by means of intermediate films made with translucent plastic materials. These films are mostly made of polyvinyl butyral (PVB), ethylene-vinyl acetate (EVA) and UV-activated resins, or simply a mixture of their ingredients.

Its most remarkable property is that, in case of fracture, the plastic film prevents glass fragments from shattering. This considerably improves its mechanical performance in case of impact and avoids the danger of glass splinters being released. This is possible thanks to its sheets or thickness (PVB).

Tempered glass is a type of safety glass, processed by thermal or chemical treatments, to increase its thermal resistance compared to regular glass. This is achieved by compressing the exterior surfaces and tensioning the interior surfaces.

Thanks to its special composition, when a tempered sheet of glass is broken by accident, it crumbles into small granular pieces instead of splintering into large jagged fragments. Granular pieces are less likely to cause injury.

Insulating glass

Insulating glass

Insulating glass, also known as double glazing, multiple glazing, or Climalit (trademark), consists of two or more glass sheets separated by a space that prevents any contact between the glass.

The inner space between the glass sheets is usually filled with dry air or other inert gas, but it is also possible to form a vacuum, thus improving their performance. In any case, the spaces are hermetically sealed to prevent air flow and the entry of pollutants.

There are also insulating glasses with special 'very low emissivity' treatments, a transparent metal coating on the inner surface, which provides 50% more insulation than conventional double glazing.

Insulating glass can be combined with other solar control functions, low emissivity, etc.

Insulating glass properties.

If there is a positive aspect to double glazing compared to other glass models, it is the possibility of creating customised glass according to the performance required. Therefore, this type of glass can incorporate heat, acoustic and safety insulation features.

For example: a product with highly beneficial features can be achieved by combining an insulating glass with a low-emissivity and solar control glass all in the same panel, even adding a laminate or acoustic laminate.

In addition, thanks to its space this glass offers very low thermal transmittance and therefore great thermal insulation, which will provide air conditioning savings of over 50%.

Finally, it must be noted that the gas contained in the space will also greatly influence the properties of the glass.

For example: the main objective of the SF6 is to improve the acoustic insulation by reducing approximately 3 dB. Argon, on the other hand, has a low heat conductivity, lower than that of air, which provides greater thermal insulation (reduction of the U value by more than 0.3 W/m²). On occasions, a mixture of two of these gasses is used to achieve specific properties.

Chamber size and energy transmittance.

The thermal transmittance (U-value) in a glass sheet has an inverse relationship to its thickness. The higher the interlayer profile (and therefore the greater the distance between the glass sheets), the lower the radiation transmission (the U-value decreases).

Please note: in spaces greater than 15-18 mm, the air currents created inside them increase energy transmission, so the generic rule referred to here does not apply.

Polycarbonate

Polycarbonate

Airclos works with translucent polycarbonate plates that are highly resistant to the elements and to possible impacts.

Polycarbonate panels properties.

These are light and rigid and provide good thermal insulation.

They are noted for their special UV ray protection system. The outer coating has a sheet on which a protective coating against UV radiation has been applied by co-extrusion. This coating offers a completely homogeneous covering on the body of the sheet.

Sandwich panel

Sandwich panel

Our roofs enable the installation of totally opaque and highly resistant aluminium plates or sandwich panels. These plates are composed of three sheets: thermo-lacquered aluminium sheets with different finishes (RAL coatings, anodised or wood) that are placed on the inside and outside, and an extruded polystyrene core of great resistance to compression that provides excellent thermal insulation.

Sandwich panel properties.

Lightweight structure with high impact resistance, manufactured in different thicknesses according to insulation needs. It also comes in a great variety of finishes, although light colours on the outside are always recommended for greater durability.

Perfect for applications in which a totally opaque enclosure is required, blocking out incoming light when it is closed. Once the system is opened, light is allowed back in.

Photovoltaic glass

Photovoltaic glass

Photovoltaic glass is made up of a series of thin layers of semiconductor materials that generate electricity by absorbing sunlight.

The composition of the glasses that we install in our roofs is 3+3 T (PV Cells) /14 / 3+3T.

Front Side

Laminated-tempered glass characterized by:

  • High emissivity.
  • Low reflectivity.
  • Low iron content.

PV cells

These photovoltaic modules use high-efficiency monocrystalline silicon cells (the cells are made of a single crystal of very high-purity silicon) to transform the energy of solar radiation into direct current electrical power.
Each cell is electrically classified to optimize the behavior of the module.
Its performance is excellent across the full range of the light spectrum, with particularly high performances in low light or cloudy situations in direct sunlight (diffuse radiation).

Encapsulant

The cell circuit is laminated using:

  • PVB (Polyvinyl Butyral).

Back side

The back contains a laminated-tempered glass that provides complete protection and sealing against environmental agents and electrical insulation.

Junction box

The IP67 junction box is made of high temperature resistant plastics and contains terminals, connection terminals and by-pass diodes.

These modules are supplied with symmetrical cables in length, with a diameter with a copper section of 4 mm and a very low contact resistance, designed to achieve minimum losses due to voltage drop strong>.

These cables are easily integrated and hidden in the profiles of the ceiling itself.

Aluminium profile finishes.

Lacquering

There are 210 shades from the RAL Classic range available for our profiles and accessories.

Further information ->

Anodising

Profiles with high resistance finish and different metallic effects: steel, silver, gold, copper, chrome, etc.

Further information ->

Embellishments

Beech, pine, oak, tigerwood and sapele are just some of the woods that embellishments imitate with great realism.

Further information ->

Some of our projects.
->
The Phoenicia Malta · Floriana, Malta

The Phoenicia, Malta

->
Meraki Restaurant · Riyadh, Arabia Saudí

Meraki Restaurant, Riyadh

->
Le Père Joseph · Rueil-Malmaison, France

French style veranda for a restaurant

Helping you out making your projects come true worldwide. Contact us ->